Hi
Retrofitting a 1.5x3m Plasma cutter with the Acorn system and was wondering where I would be able obtain setting for the Profile Manager.
Also are the figures in the profile manager just a conservative starting point, and one needs to tweak those figures for their machine ??
Thanks
Hypertherm PowerMax 125
-
Joey
- Posts: 516
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hypertherm PowerMax 125
Will Attach the Powermax125A Profiles Shortly. Profiles by default are Powermax85A
-
Joey
- Posts: 516
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hypertherm PowerMax 125
I have Arranged this profiles folder with the Hypertherm PowerMax 125 specific profiles.
Just download the attached profiles zip folder. Extract the (profiles) folder from the zip folder.
The attached profiles folder will replace your current profiles folder.
You profiles folder Path is C:\cncm\resources\plasma\profiles
Hope this helps.
Just download the attached profiles zip folder. Extract the (profiles) folder from the zip folder.
The attached profiles folder will replace your current profiles folder.
You profiles folder Path is C:\cncm\resources\plasma\profiles
Hope this helps.
- Attachments
-
- profiles.zip
- (308.72 KiB) Downloaded 29 times
-
NovaStar
- Posts: 59
- Joined: Mon Jul 06, 2020 6:21 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0035FF8A54E0-0610203404
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Hypertherm PowerMax 125
Hey Joey
Thank you so much, very much appreciated
Thank you so much, very much appreciated