Post processor for Fusion 360 with Acorn

JLD · Post by **JLD** » Mon Sep 18, 2023 1:46 pm

Team,

Over the weekend I built a new control panel with an Acorn CNC control board setup for plasma cutting. I have everything tested and ready to run but I can't find a PP in Fusion 360 library for plasma cutting. I do all of my drawing in Fusion so it would be great to PP out of there. Is there a PP available for download. Any help will be greatly appreciated

Regards

suntravel · Post by **suntravel** » Mon Sep 18, 2023 2:23 pm

take a look here:

https://centroidcncforum.com/viewtopic.php?f=65&t=7660

Uwe

JLD · Post by **JLD** » Mon Sep 18, 2023 3:17 pm

Thank you for the link. I see there are two choices to download. One that says Fusion Acorn Plasma and one that says PlasmaRotary. Is there any difference? Is one a newer version of the other one? Which one should I use for a 3 axis plasma table

Thanks

Joey · Post by **Joey** » Mon Sep 18, 2023 3:19 pm

The Rotary Post is a Sheetcam Post.
The Fusion Post is the one you want.

JLD · Post by **JLD** » Mon Sep 18, 2023 3:23 pm

Awesome. I will give it a try tonight after work and post an update tomorrow.

JLD · Post by **JLD** » Wed Sep 20, 2023 8:59 am

Update,

The Fusion Acorn Plasma PP worked great. Thank You

Centroid Community CNC Support Forum

Post processor for Fusion 360 with Acorn

Post processor for Fusion 360 with Acorn

Re: Post processor for Fusion 360 with Acorn

Re: Post processor for Fusion 360 with Acorn

Re: Post processor for Fusion 360 with Acorn

Re: Post processor for Fusion 360 with Acorn

Re: Post processor for Fusion 360 with Acorn