- plasma sweet spot.png (45.37 KiB) Viewed 16635 times
Mechanical and electronic gearing optimization for plasma machines
-
cnckeith
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Mechanical and electronic gearing optimization for plasma machines
Plasma machine mechanical gearing and electronic gearing sweet spot.
The plasma installation manual also discusses this in detail. If you want your machine to run the best that it can arrange things mechanically and electronically to fit in the sweet spot.
The plasma installation manual also discusses this in detail. If you want your machine to run the best that it can arrange things mechanically and electronically to fit in the sweet spot.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html