Retrofit Koike Monograph

All things related to the Centroid Acorn Plasma system.

Moderators: cnckeith, Joey

Post Reply
Omniprojets
Posts: 2
Joined: Sat Apr 08, 2023 2:13 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Retrofit Koike Monograph

Post by Omniprojets »

Hello,
I am french and i've just discovered this forum.
I want to retrofit my Koike Monograph Millenium with a new CNC and New stepmotors.
Someone can help me to choose the good products?

Best regards
Didier
Joey
Posts: 465
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Retrofit Koike Monograph

Post by Joey »

Hello Didier welcome

Can you post some pictures of the table? It would be easiest if you start a Google photos album. Pictures are easier and clearer to view in a Google album also.

Take pictures of the axis motors locations on the table and any mechanical parts that are used to move each axis.

What type of plasma cutter do you have?

Are you looking for the best money can buy for your motors or medium level equipment that gets the job done ?

I've never looked at a monograph brand table so I'm eager to check out what you have! Thanks for sharing!
Omniprojets
Posts: 2
Joined: Sat Apr 08, 2023 2:13 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: Retrofit Koike Monograph

Post by Omniprojets »

Hi Joe,

I have no photo of my table but I have the last documentation in pdf file.

Nowaday, the cnc runs on win XP!
And recently, the z-axis breaks down. I bought a new stepper motor but it doesn't work.

I prefer retrofit than repair because it's diffiult to find spares parts now.

I would like a touch screen and a solid pc on this cnc.

Thanks for your help.
Attachments
MONOGRAPH MILLENNIUM CUTTER II mi0556a.pdf
(2.27 MiB) Downloaded 15 times
Post Reply