Thc non plasma usage

[Joey]

Joey I need a different cnc12 plasma profile that will have different input configuration and also different motors configuration.

Is it possible?

It is not possible. Best way would be to set up a build for each. And rename the cncm folder to switch between both builds.

[Tamarbarr]

Hey there .
I'm posting all the progress I made on the fiber laser integrated sheet and tube cutter.

I've downloaded the new cnc12 version 5.06
The rotary axis with THC ON the Z axis still losing its position unfortunately that problem still isn't resolved.


Here is the report from the new cnc12 version 5.06

report_98F07BA08F52-0425226032_2023-08-06_14-23-50.zip

(6.02 MiB) Downloaded 9 times

Here is the latest sheetcam plasma rotary post processor

PlasmaRotary Centroid V7.zip

(2.42 KiB) Downloaded 10 times

Here is a short program that I've made using the latest sheetcam plasma rotary post processor.
4040mm square tube 100mm long.

4040 NEW LASER 9.zip

(8.38 KiB) Downloaded 8 times

Here are couple of photos and videos of the fiber laser cutter.

https://drive.google.com/drive/folders/ ... b28enhjySA

[Tamarbarr]

Hey joey, I I'm having trouble with the rotary plasma.
The problem is that it can't recut.
For example if I have a torch collision for some reason I can't start the program again.
Is there a way to fix it?