Page 1 of 1
Inches to metric
Posted: Mon Mar 27, 2023 10:41 pm
by ftraube@gmail.com
How do I change CNC12 from inches to metric?
All my drawings and everything we cut is metric
Re: Inches to metric
Posted: Tue Mar 28, 2023 6:10 am
by suntravel
Setup / Config / Contrl
Uwe
Re: Inches to metric
Posted: Tue Mar 28, 2023 12:11 pm
by ftraube@gmail.com
Thanks for your reply
Config asks for a password. I type 000, Says Limited access.
Then I can see inches/metric, but not allowed to modify.
I have PRO, License activated.
How do I setup or request the Password?
checked all documentation, no reference to that password
Thanks
Re: Inches to metric
Posted: Tue Mar 28, 2023 12:22 pm
by avp
Default password is 137
Re: Inches to metric
Posted: Tue Mar 28, 2023 12:33 pm
by Sword
Disable it in the wizard at Preferences/CNC Control, first option top of the page.
Re: Inches to metric
Posted: Tue Mar 28, 2023 12:49 pm
by ftraube@gmail.com
Password worked, I was able to change to mm.
Thanks for your help
Re: Inches to metric
Posted: Tue Mar 28, 2023 2:59 pm
by cnckeith
ftraube@gmail.com wrote: ↑Tue Mar 28, 2023 12:49 pm
Password worked, I was able to change to mm.
Thanks for your help
be sure to change both "machine units" and "DRO display units" to Millimeters. shut down, reboot, re home out to be safe.
Re: Inches to metric
Posted: Tue Mar 28, 2023 6:11 pm
by tblough
Once you get to the configuration screen, you actually change between inch and mm by hitting the spacebar. Change both as Keith said.
Re: Inches to metric
Posted: Thu Mar 30, 2023 12:11 am
by ftraube@gmail.com
Got it. Thanks for the advise