Panel build Centroid Acorn Plasma

All things related to the Centroid Acorn Plasma system.

Moderators: cnckeith, Joey

Post Reply
repauli1
Posts: 156
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Panel build Centroid Acorn Plasma

Post by repauli1 »

https://photos.app.goo.gl/tnLY9RGycZ51N6f68
Specs:
Centroid Acorn Plasma controller & THC (Black Rx & TX )
Yaskawa Sigma 5 drive paks with 750watt servos (gantry 300lbs)
10:1 reduction
2 enclosures bolted back to back, low voltage panel 24x24x6, high voltage 24x24x10
Nema1 UL approved sourced from Vevor.com
Panel hookup wire 18ga, stranded
Ferrules crimped on all connections.
Heat shrink lables using Panisonic printer
All components drilled and tapped,socket bolted to backplate.
Frame for panels, monitor, pc 1x1x.125 steel tube, steel wheels to prevent slag melt.
Attachments
20230307_142412.jpg
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Panel build Centroid Acorn Plasma

Post by cnckeith »

fantastic! thanks for posting, looks great.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply