Thanks for pointing that out Anthony and sorry for the confusion. Yes, diagram S15114 is 100% the correct diagram for your generation board. Looks like ANHV terminal never made it onto the Green board schematic. I can see that this would lead to questions on weather Green THC board schematic is even the right schematic for your board since the board pictured was missing the ANHV terminal.
Your on the right track. If you come across any other discrepancies feel free to call them out. Thank you
Older Green TX board
-
- Posts: 7166
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Older Green TX board
we left the anhv label off of the schematic on purpose, it was never implemented and has been eliminated. follow the schematic and do not hook anything up to any connection labeled "NC" = No Connection
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html