505 error

All things related to the Centroid Acorn Plasma system.

Moderators: cnckeith, Joey

fisher_transport
Posts: 9
Joined: Fri Sep 23, 2022 10:17 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3484e425f500-0513226202
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by fisher_transport »

I haven’t had much time to play with it I’m back on the road but tried to cut some stuff other day and torch started to dive into metal again. Haven’t had time to look at it and see where the interference is at but weird cut same piece day before and cut really good then cut another the next day same file same metal just different part and nothing but five issues
Joey
Posts: 466
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

Until the interference is resolved cut with the THC disabled. The THC is just reacting to the interference. The THC won't enable most of the time anyways due to anti dive stopping the THC from reacting. If THC does get a chance to come on it won't be good.
Joey
Posts: 466
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

fisher_transport wrote: Mon Jan 09, 2023 9:01 pm I haven’t had much time to play with it I’m back on the road but tried to cut some stuff other day and torch started to dive into metal again. Haven’t had time to look at it and see where the interference is at but weird cut same piece day before and cut really good then cut another the next day same file same metal just different part and nothing but five issues
Can you create and throw up a fresh report for me to check out?
fisher_transport
Posts: 9
Joined: Fri Sep 23, 2022 10:17 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3484e425f500-0513226202
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by fisher_transport »

Yeah I’m down in Arkansas I will when I get back to Idaho
Joey
Posts: 466
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

Safe travels.
What kind of motors and drives are you running also?
Post Reply