Anyone else getting a 505 error "invalid value" error after loading a (newest version sheetcam, AND Centroid Acorn 8.2) a gcode file, and pressing GRAPH?
Will upload report when customer is available.
Thanks
Bob
505 error
-
- Posts: 502
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 505 error
Haven't update the latest version of Sheetcam. Will check that out here shortly
-
- Posts: 502
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 505 error
Just threw a couple dxf's into the latest SheetCam TNG V7.0.20. Everything worked as expected. Can you throw the Gcode file up so I can have a look at it.
-
- Posts: 9
- Joined: Fri Sep 23, 2022 10:17 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3484e425f500-0513226202
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 505 error
joey you want to team view my system and check it out? i tried uploading file but the forum system wont except .tap or .job
-
- Posts: 9
- Joined: Fri Sep 23, 2022 10:17 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3484e425f500-0513226202
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 502
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 505 error
I'd like to check it out yes. I just tried the file on my machine and I'm able to run it.
-
- Posts: 502
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 505 error
Send me an email or txt a picture of the Team Viewer info. You can call my cell when your ready. Email mccullochjoey@gmail.com
Cell: 8145711043
Cell: 8145711043
-
- Posts: 502
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 505 error
Have tried loading the .TXT file you posted? That's what I loaded. But I'm not sure the gcode is exactly right...
-
- Posts: 9
- Joined: Fri Sep 23, 2022 10:17 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3484e425f500-0513226202
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 502
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 505 error
Results were the gcode that Sheetcam was outputting had M codes from another system that could not be read. In the gcode file that was posted the lines that started with M67 were commented out because they were causing CNC12 to throw an error. M67 is not used or read by CNC12 and cannot be used.
Lesson from this is it's a good idea to remove any previous systems mcodes or setting when using Sheetcam for Acorn Plasma. Once the previous systems settings were removed Sheetcam posted clean Gcode that functioned properly with Acorn Plasma.
Lesson from this is it's a good idea to remove any previous systems mcodes or setting when using Sheetcam for Acorn Plasma. Once the previous systems settings were removed Sheetcam posted clean Gcode that functioned properly with Acorn Plasma.