505 error

All things related to the Centroid Acorn Plasma system.

Moderators: cnckeith, Joey

repauli1
Posts: 156
Joined: Thu Jul 09, 2020 9:50 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

505 error

Post by repauli1 »

Anyone else getting a 505 error "invalid value" error after loading a (newest version sheetcam, AND Centroid Acorn 8.2) a gcode file, and pressing GRAPH?
Will upload report when customer is available.
Thanks
Bob
Joey
Posts: 465
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

Haven't update the latest version of Sheetcam. Will check that out here shortly
Joey
Posts: 465
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

Just threw a couple dxf's into the latest SheetCam TNG V7.0.20. Everything worked as expected. Can you throw the Gcode file up so I can have a look at it.
fisher_transport
Posts: 9
Joined: Fri Sep 23, 2022 10:17 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3484e425f500-0513226202
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by fisher_transport »

joey you want to team view my system and check it out? i tried uploading file but the forum system wont except .tap or .job
fisher_transport
Posts: 9
Joined: Fri Sep 23, 2022 10:17 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3484e425f500-0513226202
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by fisher_transport »

file
Attachments
dex.txt
(71.68 KiB) Downloaded 7 times
Joey
Posts: 465
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

I'd like to check it out yes. I just tried the file on my machine and I'm able to run it.
Joey
Posts: 465
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

Send me an email or txt a picture of the Team Viewer info. You can call my cell when your ready. Email mccullochjoey@gmail.com
Cell: 8145711043
Joey
Posts: 465
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

Have tried loading the .TXT file you posted? That's what I loaded. But I'm not sure the gcode is exactly right...
fisher_transport
Posts: 9
Joined: Fri Sep 23, 2022 10:17 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3484e425f500-0513226202
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by fisher_transport »

joey didnt want to txt you but this look better?
Attachments
Screenshot (55).png
Joey
Posts: 465
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 505 error

Post by Joey »

Results were the gcode that Sheetcam was outputting had M codes from another system that could not be read. In the gcode file that was posted the lines that started with M67 were commented out because they were causing CNC12 to throw an error. M67 is not used or read by CNC12 and cannot be used.

Lesson from this is it's a good idea to remove any previous systems mcodes or setting when using Sheetcam for Acorn Plasma. Once the previous systems settings were removed Sheetcam posted clean Gcode that functioned properly with Acorn Plasma.
Post Reply