Acorn plasma software

All things related to the Centroid Acorn Plasma system.

Moderator: cnckeith

Post Reply
jerryk
Posts: 1
Joined: Thu Sep 22, 2022 1:26 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Acorn plasma software

Post by jerryk »

Is there a way to tryout the plasma software just on my pc to see if I like it before I buy it. Also what are the benefits of the ultimate vs the pro software? Is my old powermax 1000 supported with the thc? Also what voltage divider would you recommend for my old plasma cutter?
Thanks
cnckeith
Posts: 4638
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Acorn plasma software

Post by cnckeith »

with ultimate you get a USB key so you can run Intercon Plasma CAM software on a offline PC.
with Ultimate you will also get any future Ultimate features that we add.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 4638
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: Acorn plasma software

Post by cnckeith »

jerryk wrote: Thu Sep 22, 2022 1:37 pm Is there a way to tryout the plasma software just on my pc to see if I like it before I buy it. Also what are the benefits of the ultimate vs the pro software? Is my old powermax 1000 supported with the thc? Also what voltage divider would you recommend for my old plasma cutter?
Thanks
there is no "demo" version available as of yet.

you can see explanation of the Acorn Plasma software in this video.

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Joey
Posts: 102
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Acorn plasma software

Post by Joey »

Hello Jerry,
The Powermax 1000 is supported with Centroid Acorn Plasma. Just make sure there is an amperage control module with the Powermax 1000. To check out the software you will need an acorn board. This can be any Acorn board so for example, if you had an Acorn mill you could download the Plasma Software and try it out on that mill.
Post Reply