Is there a way to tryout the plasma software just on my pc to see if I like it before I buy it. Also what are the benefits of the ultimate vs the pro software? Is my old powermax 1000 supported with the thc? Also what voltage divider would you recommend for my old plasma cutter?
Thanks
Acorn plasma software
-
cnckeith
- Posts: 6233
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Acorn plasma software
with ultimate you get a USB key so you can run Intercon Plasma CAM software on a offline PC.
with Ultimate you will also get any future Ultimate features that we add.
with Ultimate you will also get any future Ultimate features that we add.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
cnckeith
- Posts: 6233
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Acorn plasma software
there is no "demo" version available as of yet.jerryk wrote: ↑Thu Sep 22, 2022 1:37 pm Is there a way to tryout the plasma software just on my pc to see if I like it before I buy it. Also what are the benefits of the ultimate vs the pro software? Is my old powermax 1000 supported with the thc? Also what voltage divider would you recommend for my old plasma cutter?
Thanks
you can see explanation of the Acorn Plasma software in this video.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
Joey
- Posts: 315
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn plasma software
Hello Jerry,
The Powermax 1000 is supported with Centroid Acorn Plasma. Just make sure there is an amperage control module with the Powermax 1000. To check out the software you will need an acorn board. This can be any Acorn board so for example, if you had an Acorn mill you could download the Plasma Software and try it out on that mill.
The Powermax 1000 is supported with Centroid Acorn Plasma. Just make sure there is an amperage control module with the Powermax 1000. To check out the software you will need an acorn board. This can be any Acorn board so for example, if you had an Acorn mill you could download the Plasma Software and try it out on that mill.
-
jerryk
- Posts: 19
- Joined: Thu Sep 22, 2022 1:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn plasma software
If I buy the pro software and find out I need the ultimate can I just pay the difference to upgrade, or do I have to pay the whole $399?
Thanks
Jerry
Thanks
Jerry
-
ShawnM
- Posts: 1879
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Acorn plasma software
I’m not 100% sure what the advantages of the ultimate software are but I have the pro version and do mostly production work on my plasma and it does everything I need it to. There’s also a post processor for SheetCam if you are going to use that CAD/CAM software. The plasma software has some really cool features with more on the way. I have a PowerMax 85 on my plasma table.
-
cnckeith
- Posts: 6233
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Acorn plasma software
Yeah when you want to upgrade from pro to ultimate there is just the difference for the cost.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
jerryk
- Posts: 19
- Joined: Thu Sep 22, 2022 1:26 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn plasma software
Thanks