Page 1 of 1
Post Processor Sheet Cam/Fusion 360
Posted: Sat Sep 10, 2022 9:18 pm
by Joey
Attached in this Post is the Post Processor for Sheetcam and Fusion 360.
I've also created a short video on how to set up path rules for commanded slower feed rates in Sheetcam.
https://photos.app.goo.gl/iv6HXpC7AJc6BmCj8
New is the Sheetcam Rotary Post Processor. Any issues with this post please report back your findings
Re: Post Processor Sheet Cam/Fusion 360
Posted: Sun Sep 11, 2022 3:02 pm
by AtomicAsian
awesome
Re: Post Processor Sheet Cam/Fusion 360
Posted: Sun Sep 11, 2022 6:20 pm
by landmark573
Update: I have used the Fusion 360 post now and it works great. My workflow is much better now not having to use Sheetcam.
Thank you Joey
Re: Post Processor Sheet Cam/Fusion 360
Posted: Tue May 02, 2023 12:51 pm
by Joey
New Sheetcam Rotary Post Processor. Any issues with this post please report back your findings. So we can Update this Post.
Re: Post Processor Sheet Cam/Fusion 360
Posted: Sat Mar 02, 2024 11:25 am
by landmark573
Joey,
I use the Fusion PP which is very basic. I want to mark (center punch) small holes which the Fusion post doesn't do. Does the Sheet Cam post have support for marking and possibly feed reduction for small holes? Other features not in the Fusion post?
I use the Fusion post because I use Fusion 360 CAD/CAM on my Acron cnc mill and didn't want to learn another CAM program
Re: Post Processor Sheet Cam/Fusion 360
Posted: Mon Apr 01, 2024 1:03 am
by Cam6.7Cummins
looking for help getting the post processor into fusion 360, tried downloading and unzipping it but no luck. looking for advice, thanks
Re: Post Processor Sheet Cam/Fusion 360
Posted: Sat Apr 13, 2024 1:31 pm
by landmark573
Did you get this worked out? I am using the Fusion 360 post and may be able to help.