Centroid Community CNC Support Forum

Attached in this Post is the Post Processor for Sheetcam and Fusion 360.

I've also created a short video on how to set up path rules for commanded slower feed rates in Sheetcam.https://photos.app.goo.gl/iv6HXpC7AJc6BmCj8

New is the Sheetcam Rotary Post Processor. Any issues with this post please report back your findings

awesome

Update: I have used the Fusion 360 post now and it works great. My workflow is much better now not having to use Sheetcam.
Thank you Joey

New Sheetcam Rotary Post Processor. Any issues with this post please report back your findings. So we can Update this Post.

Joey,

I use the Fusion PP which is very basic. I want to mark (center punch) small holes which the Fusion post doesn't do. Does the Sheet Cam post have support for marking and possibly feed reduction for small holes? Other features not in the Fusion post?

I use the Fusion post because I use Fusion 360 CAD/CAM on my Acron cnc mill and didn't want to learn another CAM program

looking for help getting the post processor into fusion 360, tried downloading and unzipping it but no luck. looking for advice, thanks

Did you get this worked out? I am using the Fusion 360 post and may be able to help.