Post Processor Sheet Cam/Fusion 360

All things related to the Centroid Acorn Plasma system.

Moderator: cnckeith

Post Reply
Joey
Posts: 102
Joined: Tue Aug 17, 2021 10:51 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Post Processor Sheet Cam/Fusion 360

Post by Joey »

Attached in this Post is the Post Processor for Sheetcam and Fusion 360.

I've also created a short video on how to set up path rules for commanded slower feed rates in Sheetcam.https://photos.app.goo.gl/iv6HXpC7AJc6BmCj8
Attachments
centroid_plasma_thc_sheetcam with feed (1) (2).zip
Sheetcam Post for Acorn Plasma
(1.38 KiB) Downloaded 8 times
fusion_acorn_plasma.zip
Fusion 360 Post for Acorn Plasma
(3.83 KiB) Downloaded 7 times
AtomicAsian
Posts: 66
Joined: Thu Jul 14, 2022 10:56 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Contact:

Re: Post Processor Sheet Cam/Fusion 360

Post by AtomicAsian »

awesome
landmark573
Posts: 53
Joined: Mon Jun 24, 2019 3:30 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Post Processor Sheet Cam/Fusion 360

Post by landmark573 »

Thank you Joey :D :!:
Post Reply