Acorn CNC Plasma in commercial/industrial environment
-
- Posts: 67
- Joined: Mon Apr 27, 2020 2:09 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Acorn CNC Plasma in commercial/industrial environment
Just wondering if anyone out there has used an Acorn controlled plasma as a "work" machine, as opposed to a hobby environment?
-
- Posts: 7164
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Acorn CNC Plasma in commercial/industrial environment
that's what its built for!
one customer has one installed on a huge machine with a 200 amp Lincoln flex cut plasma unit.
one customer has one installed on a huge machine with a 200 amp Lincoln flex cut plasma unit.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2190
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Acorn CNC Plasma in commercial/industrial environment
I am using my ShopSabre plasma equipped with the Acorn & THC for "work" as opposed to a hobby. Cutting hundreds of the same parts over and over. Up to 3/4" plate for some jobs. I finally have my arc voltage gremlin caged and he's no longer an issue.
I need to get a line filter on the control cabinet as I sometimes get noise on the incoming power to the Acorn control (pc resends) when using the horizontal band saw at the same time.
I need to get a line filter on the control cabinet as I sometimes get noise on the incoming power to the Acorn control (pc resends) when using the horizontal band saw at the same time.
-
- Posts: 156
- Joined: Thu Jul 09, 2020 9:50 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn CNC Plasma in commercial/industrial environment
In response to your question, I use my plasma table when I need brackets, etc. So can't comment on "everyday production", but what I can comment on is the fact their plasma "motion control" IS SOLID in the production machining world. The plasma version is simply a modified mill version. When I say simply, that's to keep in layman's terms, but I have viewed the source code, and you can tell that there has been thousands of hours of programming, and testing in the development of this product. I have been involved in beta phase, and used it thru a lot of testing. It is solid, and I would not hesitate to utilize in day to day production.