12" DB9 Standard, Longer Cables can be purchased here.

All things related to the Centroid Acorn Plasma system.

Moderator: cnckeith

Post Reply
cnckeith
Posts: 4410
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

12" DB9 Standard, Longer Cables can be purchased here.

Post by cnckeith »

we are going to ship 12" db9 "encoder cable" with the THC kit, if users need longer cables for mounting the TX board far away in another cabinet then longer shielded DB9 cables can be purchased on Amazon. 18" and 36" are available. avoid going any longer.

https://amzn.to/3fDxFg8
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply