Here is a video on Nesting parts in Sheetcam. I really only needed to watch the first minute of the video.
https://www.youtube.com/watch?v=L-c0UvSles8
CargoGlide CNC Plasma Torch System
-
tylerd
- Posts: 6
- Joined: Tue Mar 22, 2022 8:34 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: CargoGlide CNC Plasma Torch System
Nice! I have a starlab and am thinking of making the switch to Acorn also. Did your table already have the Clearpath servos, and gear reduction? Or did you add that when you went to the acorn system? Also looks like you are using prox switches for your Z, and limits? Did you migrate from Command CNC or did you previously have a Mach system? Sorry 20 questions. Finally how happy are you so far with the Acorn system vs what you had previously?
Thanks for your time!
Thanks for your time!
-
bloomingtonmike
- Posts: 114
- Joined: Wed Sep 11, 2013 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 0916130849
- DC3IOB: No
- CNC11: Yes
- CPU10 or CPU7: No
Re: CargoGlide CNC Plasma Torch System
Whats the use for the io board on a plasma machine. Looks like not being used yet correct? What are the plans for it?
Mikie in Bloomington IL