Centroid v 4, extends and hits the material.
-
- Posts: 5
- Joined: Tue Apr 09, 2024 1:52 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: Yes
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Centroid v 4, extends and hits the material.
My plasma with centrod v4, extends and get jumpy when it reaches maximum down limit. sometimes it would press the material if circle start is dialed, no firing, not cutting .here is my report attached. kindly help
- Attachments
-
- report_E062345DAAEA-0506214764_2024-04-09_04-00-51.zip
- (1.36 MiB) Downloaded 6 times
-
- Posts: 529
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid v 4, extends and hits the material.
Welcome to the forum. Thank you for the Report.
Can you please attach the Gcode jobs you are running when the Z locks up. I want to see the Gcode job you a using.
You best chance at having a working Plasma table with the Acorn is to Download and install Acorn Plasma software. Your current software is Acorn mill.
Download the Latest 5.08 software to install Acorn Plasma. https://centroidcnc.com/centroid_diy/ce ... loads.html
I understand you may not want to switch to the Plasma software because you would need a plasma license And the Acorn Already has a Mill pro license.
Can you please attach the Gcode jobs you are running when the Z locks up. I want to see the Gcode job you a using.
You best chance at having a working Plasma table with the Acorn is to Download and install Acorn Plasma software. Your current software is Acorn mill.
Download the Latest 5.08 software to install Acorn Plasma. https://centroidcnc.com/centroid_diy/ce ... loads.html
I understand you may not want to switch to the Plasma software because you would need a plasma license And the Acorn Already has a Mill pro license.
-
- Posts: 5
- Joined: Tue Apr 09, 2024 1:52 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: Yes
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid v 4, extends and hits the material.
i use sheetcam post processor. to generate Gcode, a part from installing latest version , what else could l try
-
- Posts: 529
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid v 4, extends and hits the material.
Download and install the latest acorn plasma software V5.08 at the link I provided in my last post
Don't worry about the license for now
Don't worry about the license for now
-
- Posts: 529
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid v 4, extends and hits the material.
Any Luck Zagga?
Do you have Internet on the machine PC?
I can help switch you to the plasma software through team viewer.
Do you have Internet on the machine PC?
I can help switch you to the plasma software through team viewer.
-
- Posts: 5
- Joined: Tue Apr 09, 2024 1:52 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: Yes
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid v 4, extends and hits the material.
Thank you l have internet. When can you get me through this. I need a whole new program with machine. .mail me ndotofred@gmail.com
-
- Posts: 529
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Centroid v 4, extends and hits the material.
Download TeamViewer
https://www.teamviewer.com
https://www.teamviewer.com