Attached in this Post is the Post Processor for Sheetcam and Fusion 360.
I've also created a short video on how to set up path rules for commanded slower feed rates in Sheetcam.https://photos.app.goo.gl/iv6HXpC7AJc6BmCj8
New is the Sheetcam Rotary Post Processor. Any issues with this post please report back your findings
Post Processor Sheet Cam/Fusion 360
-
- Posts: 529
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Post Processor Sheet Cam/Fusion 360
- Attachments
-
- PlasmaRotary Centroid V6.zip
- Sheetcam Post for Acorn Plasma Rotary
- (2.41 KiB) Downloaded 21 times
-
- centroid_plasma_thc_sheetcam with feed (1) (2).zip
- Sheetcam Post for Acorn Plasma
- (1.38 KiB) Downloaded 82 times
-
- fusion_acorn_plasma.zip
- Fusion 360 Post for Acorn Plasma
- (3.83 KiB) Downloaded 86 times
Last edited by Joey on Tue May 02, 2023 12:49 pm, edited 2 times in total.
-
- Posts: 70
- Joined: Thu Jul 14, 2022 10:56 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Contact:
-
- Posts: 90
- Joined: Mon Jun 24, 2019 3:30 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Post Processor Sheet Cam/Fusion 360
Update: I have used the Fusion 360 post now and it works great. My workflow is much better now not having to use Sheetcam.
Thank you Joey
Thank you Joey
-
- Posts: 529
- Joined: Tue Aug 17, 2021 10:51 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Post Processor Sheet Cam/Fusion 360
New Sheetcam Rotary Post Processor. Any issues with this post please report back your findings. So we can Update this Post.
-
- Posts: 90
- Joined: Mon Jun 24, 2019 3:30 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Post Processor Sheet Cam/Fusion 360
Joey,
I use the Fusion PP which is very basic. I want to mark (center punch) small holes which the Fusion post doesn't do. Does the Sheet Cam post have support for marking and possibly feed reduction for small holes? Other features not in the Fusion post?
I use the Fusion post because I use Fusion 360 CAD/CAM on my Acron cnc mill and didn't want to learn another CAM program
I use the Fusion PP which is very basic. I want to mark (center punch) small holes which the Fusion post doesn't do. Does the Sheet Cam post have support for marking and possibly feed reduction for small holes? Other features not in the Fusion post?
I use the Fusion post because I use Fusion 360 CAD/CAM on my Acron cnc mill and didn't want to learn another CAM program
-
- Posts: 2
- Joined: Thu Jan 20, 2022 10:22 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: (302837901215215447)
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Post Processor Sheet Cam/Fusion 360
looking for help getting the post processor into fusion 360, tried downloading and unzipping it but no luck. looking for advice, thanks
-
- Posts: 90
- Joined: Mon Jun 24, 2019 3:30 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Post Processor Sheet Cam/Fusion 360
Did you get this worked out? I am using the Fusion 360 post and may be able to help.