Cnc10 takes forever to read in the directory
Moderator: cnckeith
-
rjtechserv
- Posts: 68
- Joined: Sun Nov 18, 2018 7:22 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: CNC12-m39-104028
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Western NY
Cnc10 takes forever to read in the directory
Anyone ever seen cnc10 take forever to load its directory?
- Attachments
-
Rob Jackson
RJ Technical Services
RJ Technical Services
-
cnckeith
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Cnc10 takes forever to read in the directory
hard drive issues? full? corrupt?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Re: Cnc10 takes forever to read in the directory
I have found that is typical behavior with CNC10 v2.3x when reading my field-work USB drive, which contains over 400 folders. Well, not "forever", but often a minute or two.
CNC10 v2.7x has no problem reading the same USB drive promptly. CNC10 v2.7x uses a newer Linux kernel.
I do not recall seeing significant delays with CNC10 v2.3x reading its own hard drive / flash card, nor reading a USB drive that contains just a handful of items.
CNC10 v2.7x has no problem reading the same USB drive promptly. CNC10 v2.7x uses a newer Linux kernel.
I do not recall seeing significant delays with CNC10 v2.3x reading its own hard drive / flash card, nor reading a USB drive that contains just a handful of items.
-
rjtechserv
- Posts: 68
- Joined: Sun Nov 18, 2018 7:22 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: CNC12-m39-104028
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
- Location: Western NY
Re: Cnc10 takes forever to read in the directory
Thanks for the reply Marc and Keith.
It started when we changed the motherboard. We are using the same flash harddrive Centroid supplied. I don't know the Linux OS at all. I'll check the directory and see if any large files are slowing up. What the best method for checking a Linux harddrive for corruption?
Thanks for your time,
Rob
It started when we changed the motherboard. We are using the same flash harddrive Centroid supplied. I don't know the Linux OS at all. I'll check the directory and see if any large files are slowing up. What the best method for checking a Linux harddrive for corruption?
Thanks for your time,
Rob
Rob Jackson
RJ Technical Services
RJ Technical Services