post processor for solidcam
Moderator: cnckeith
-
Tek208
- Posts: 8
- Joined: Mon Sep 18, 2023 4:50 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: K104742
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
post processor for solidcam
Does anyone have a post processor for solidcam/ solidworks that would work with my 3 axis router. I can make minor adjustments just looking for something to start with.
-
tblough
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: post processor for solidcam
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.