Hi,
I found that one of my encoders is dead during the bench test. I have a replacement but can anyone help with details of the connector used inside the motor cap? These are the SEM motors supplied by Centroid in the 90's. I need either the connector and pins or just some pins as I can reuse the housing.
Encoder connector
Moderator: cnckeith
Re: Encoder connector
Those are Molex "SL Modular" connectors, also called "C-Grid".
Look for Molex part numbers 701070008 and 16020115.
Look for Molex part numbers 701070008 and 16020115.
-
- Posts: 11
- Joined: Sun Dec 24, 2023 12:54 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: Yes
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Encoder connector
Many thanks,
I have ordered some from Mouser in the US as the UK supplier had minimum order of 6000 pins and no stock of the shell!
I have ordered some from Mouser in the US as the UK supplier had minimum order of 6000 pins and no stock of the shell!