Hello,
Finally getting my machine moving and encountered some strange behavior. Before homing, if you enter MDI mode, parameter 64 is being reset to 0. This decouples the paired X and B axes, which could be catastrophic if a move is made. Parameter 64 remains set correctly during restarts, but as soon as MDI mode is entered (with the machine un-homed) it appears to be reset to 0. Has anyone encountered this before? Thanks!
-Paul
Entering MDI sets Parameter 64 to 0
Moderator: cnckeith
-
MrBowtie
- Posts: 2
- Joined: Mon Dec 04, 2023 8:33 pm
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901327
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Entering MDI sets Parameter 64 to 0
- Attachments
-
- report_0008DC111213-1103231512_2023-12-04_17-12-54.zip
- Current report.zip
- (753.06 KiB) Downloaded 13 times
-
Sword
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: Entering MDI sets Parameter 64 to 0
It looks like you're running with the "Free" license. Apply your license, and pairing will stay enabled.
Scott