WHY CAN I GET NO ONE TO ANSWER ANYTHING I POST ON THIS FORUM EVER
Moderator: cnckeith
-
- Posts: 3
- Joined: Fri Jun 16, 2023 11:40 am
- Acorn CNC Controller: No
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 10701
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: Yes
WHY CAN I GET NO ONE TO ANSWER ANYTHING I POST ON THIS FORUM EVER
I HAVE TRIED USING THIS FORUM AND CANNOT GET A ANSWER FROM ANYONE EVER PERIOD AM I DOING SOMETHING WRONG? AM I POSTING IN WRONG PLACE OR DO I HAVE SOMETHING TURNED OFF BECAUSE I CANT GET HELP AT ALL.
-
- Posts: 369
- Joined: Thu Nov 15, 2018 10:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7CBF8b-103011290
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: WHY CAN I GET NO ONE TO ANSWER ANYTHING I POST ON THIS FORUM EVER
People can see your posts. Just wanted to let you know that. I see that you posted 3 posts including this one. One has responses. The other is about a limit switch problem. I hate to tell you but the only resolution for something like that is to trace that all the way through to the controller. Something is tripping that input. In many cases, the CNC12 software has nothing to do with the real issue. Switches go bad, wires get pulled on, etc.
-
- Posts: 98
- Joined: Fri Jun 10, 2011 8:31 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: WHY CAN I GET NO ONE TO ANSWER ANYTHING I POST ON THIS FORUM EVER
Guys
If you provide proper information of your problem with report, pictures and a short video clips then we are able to answer .
Also a short video clip of the problem is more helpful then the whole typed story .
Believe ma i am providing centroid services from last 20+ years in our region (Not USA) .without proper information i don't reply to customer
If you provide proper information of your problem with report, pictures and a short video clips then we are able to answer .
Also a short video clip of the problem is more helpful then the whole typed story .
Believe ma i am providing centroid services from last 20+ years in our region (Not USA) .without proper information i don't reply to customer
-
- Posts: 370
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: WHY CAN I GET NO ONE TO ANSWER ANYTHING I POST ON THIS FORUM EVER
His first post back in August was answered within 55 Minutes by Tom B.
His second post was just a few hours before this one!!!
Perhaps he needs a new keyboard as the CapsLock appears to be stuck
His second post was just a few hours before this one!!!
Perhaps he needs a new keyboard as the CapsLock appears to be stuck
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: WHY CAN I GET NO ONE TO ANSWER ANYTHING I POST ON THIS FORUM EVER
what's the question?
I see you made on thread so far, and it has responses.
https://centroidcncforum.com/viewtopic. ... 710#p80710
and you also hijacked this thread.
https://centroidcncforum.com/viewtopic. ... 812#p78812
would be good for you to start a new thread on any new subjects and post good information as per the free tech support posting guidelines and you will get good help. this is the best CNC DIY forum on the internet with alot of smart people helping out!
if you don't want to do that an alternative is Centroid one on one tech support with a factory technician which is available for $120 / hr.
https://shopcentroidcnc.com/centroid-fa ... l-support/
I see you made on thread so far, and it has responses.
https://centroidcncforum.com/viewtopic. ... 710#p80710
and you also hijacked this thread.
https://centroidcncforum.com/viewtopic. ... 812#p78812
would be good for you to start a new thread on any new subjects and post good information as per the free tech support posting guidelines and you will get good help. this is the best CNC DIY forum on the internet with alot of smart people helping out!
if you don't want to do that an alternative is Centroid one on one tech support with a factory technician which is available for $120 / hr.
https://shopcentroidcnc.com/centroid-fa ... l-support/
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html