ALLIN1DC MAPPING

[Fordmasterkw]

Random question
setting up an old Sidney lathe to 2-axis CNC with ALLIN1DC Glentek 29inlb motors

When I press Y+/Y- with the jog panel the X servo moves correctly and also in DRO too
when I press X+/X- with the jog panel the Z servo moves correctly and also DRO too

par 300 is set to 3
par 301 is set to 1
par 308 is 1
par 309 is 2

I have X motor connected to out 1 on ALLIN1DC X encoder port 2
I have Z motor connected to out 3 on ALLIN1DC Z encoder port 1
I have tried different mapping and connections with scary outcomes:) (runaway)

I have failed to locate Docs on setting this up. I only can find the Mill set up. Is there a Parms list for lathe?

thanks

[tblough]

For a lathe, Z is axis #1 and X is axis #2. This info is found in the Configuration section of the Lathe Operator's Manual - https://www.centroidcnc.com/centroid_di ... manual.pdf

[Fordmasterkw]

Tom thanks for the link!

never would have thought to look for that there.

Karl