Does anyone have a drawing (or even a sketch) of the standard DC motor cable with an MS connector for the motor connection and the DB9 for the encoder to the control connections. I have even checked several legacy schematics, and the pinout is not on any of them. That is of course unless I have neglected to zoom in enough to compensate for my 70 year-old eyes. Thank You in advance.
Jeffrey
MS connector on DC motor
Moderator: cnckeith
-
- Posts: 67
- Joined: Mon Apr 27, 2020 2:09 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: MS connector on DC motor
Thanks!