Hi
Thanks for adding me to the forum.
we have just aquired a milling machine fitted with a Centroid M-400 display & controller.
Is there anyone in the UK who can support us with training etc?
As a point of interest, I do have a link to Pennsylvania, the village of Penn, of William Penn fame, is a short walk down the road. I have even had a few pints in the pub that (maybe) he used to go into before he left England.
Training in the UK
Moderator: cnckeith
-
- Posts: 2
- Joined: Mon Jun 12, 2023 8:00 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Training in the UK
i moved this post out of the Acorn forum.
you might try and post on facebook centroid cnc users group.
and the facebook Acorn cnc users group. i thought there were a guys guys from the UK on there.
you might try and post on facebook centroid cnc users group.
and the facebook Acorn cnc users group. i thought there were a guys guys from the UK on there.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 98
- Joined: Fri Jun 10, 2011 8:31 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Training in the UK
I can offer comprehensive Online training.which CAM software you are using ? Or on Centroid conversational ?
-
- Posts: 2
- Joined: Mon Jun 12, 2023 8:00 am
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Training in the UK
Thanks CNCkeith.
Will try FB
Will try FB