allin1DC controller on 2D eztrak intercon use

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
jonr
Posts: 9
Joined: Thu Mar 21, 2019 10:26 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0222192163
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

allin1DC controller on 2D eztrak intercon use

Post by jonr »

Hi Folks,

I am trying to use intercon to generate 2d code for simple cuts. It adds a Z axis home that trips up the software since there is no Z axis. I have been manually commenting out and adding a M00 to allow me to set the quill and/or knee.

Is there any work around for this so I don't have to comment out z moves? Or do I have a setting incorrect?

I couldn't find any previous pertinent posts.

Thanks,
Jon
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: allin1DC controller on 2D eztrak intercon use

Post by tblough »

Intercon will only output Z axis moves IF you have a Z axis configured. Post a report from your machine so we can see how it is set up.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
jonr
Posts: 9
Joined: Thu Mar 21, 2019 10:26 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0222192163
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: allin1DC controller on 2D eztrak intercon use

Post by jonr »

Thanks tblough. Report is attached.

Thanks,
Jon
jonr
Posts: 9
Joined: Thu Mar 21, 2019 10:26 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0222192163
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: allin1DC controller on 2D eztrak intercon use

Post by jonr »

I also just attached a pic with the line of code that gives me trouble highlighted. I added the parentheses to comment it out.

Thanks again,
Jo
Attachments
IMG_3935.jpeg
Post Reply