Hi Folks,
I am trying to use intercon to generate 2d code for simple cuts. It adds a Z axis home that trips up the software since there is no Z axis. I have been manually commenting out and adding a M00 to allow me to set the quill and/or knee.
Is there any work around for this so I don't have to comment out z moves? Or do I have a setting incorrect?
I couldn't find any previous pertinent posts.
Thanks,
Jon
allin1DC controller on 2D eztrak intercon use
Moderator: cnckeith
-
- Posts: 3101
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: allin1DC controller on 2D eztrak intercon use
Intercon will only output Z axis moves IF you have a Z axis configured. Post a report from your machine so we can see how it is set up.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 9
- Joined: Thu Mar 21, 2019 10:26 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0222192163
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: allin1DC controller on 2D eztrak intercon use
Thanks tblough. Report is attached.
Thanks,
Jon
Thanks,
Jon
-
- Posts: 9
- Joined: Thu Mar 21, 2019 10:26 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: 0222192163
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: allin1DC controller on 2D eztrak intercon use
I also just attached a pic with the line of code that gives me trouble highlighted. I added the parentheses to comment it out.
Thanks again,
Jo
Thanks again,
Jo