Rapid after G42 moving very slow

[ColinTristar]

Getting through some programming on an Oak controlled CNC running the latest greatest Centroid software etc.
In my program for resurfacing intake flanges on automotive cylinder heads I have to follow a wall with my shell mill. The program itself is working great, however I am trying to speed it up for production and after i use G42 for cutter comp the rapid to get to the beginning of the cut moves at 3ipm. I beleive what it is doing here is actually applying the cutter compensation but I am not 100% sure of that. Anyone else had this issue, and is there a parameter I can edit or a way to have the rapid completed.. rapidly lol.

Attached is a pic of the G-Code line giving me troubles.

Thanks for the help!

[cnckeith]

post a fresh report.zip and the offending g code program.

in general don't use a rapid to 'get compensated', use a line. G1

[cnckeith]

examples of how to use cutter comp properly is gone over in old mill training video.

and in the step by step tutorials found in the mill operator manual.