Page 1 of 1
Siemens ac servo motors
Posted: Thu Jul 21, 2016 2:10 pm
by converterking
Will Centroid servo amps work with Siemens 2.5 and 3.5 kw ac servo motors?
Re: Siemens ac servo motors
Posted: Fri Jul 22, 2016 7:49 am
by Centroid_Liviu
Do you have the model numbers and the specifications on them? Our ACDC drives can handle up to 4kW motors but we may need to test them and determine PID parameters if its a servomotor we have not encountered before. Do you still have the original drives? Its possible we could command those. The Oak board is capable of commanding 3rd party drives in both velocity (-10 to +10V) and position mode.