Siemens ac servo motors
Moderator: cnckeith
-
- Posts: 129
- Joined: Fri Mar 19, 2010 2:38 pm
Siemens ac servo motors
Will Centroid servo amps work with Siemens 2.5 and 3.5 kw ac servo motors?
-
- Posts: 431
- Joined: Mon Jul 18, 2011 9:57 am
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Siemens ac servo motors
Do you have the model numbers and the specifications on them? Our ACDC drives can handle up to 4kW motors but we may need to test them and determine PID parameters if its a servomotor we have not encountered before. Do you still have the original drives? Its possible we could command those. The Oak board is capable of commanding 3rd party drives in both velocity (-10 to +10V) and position mode.
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)