ATC over and up program scematics
Moderator: cnckeith
-
hunterjake96
- Posts: 3
- Joined: Wed Mar 08, 2023 12:42 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901239
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
ATC over and up program scematics
I am in need of a schematic for the ATC left right up down umbrella. I also have a question about analog speed control for the spindle. My drive requires +10 forward to -10 reverse for directional control and speed. I have the spindle running but only in forward.
-
tblough
- Posts: 3089
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: ATC over and up program scematics
Search for +bipolar +10V - a couple of threads here have touched on this. Oak and Allin1DC can do it with some PLC changes.
https://centroidcncforum.com/search.php ... mit=Search
https://centroidcncforum.com/search.php ... mit=Search
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.