Encoder Cables / Connectors

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Skunk
Posts: 65
Joined: Fri Mar 03, 2023 6:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0008dc111213-1223222881
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Encoder Cables / Connectors

Post by Skunk »

Wiring up the Encoders. I have > 4ft of excess cable.

I want to remove the excess on this end of the cable.
20230313_210014.jpg
Are these Molex Mini-Fit JR connectors?
20230313_215325.jpg
Centroid_Tech2
Posts: 97
Joined: Mon Mar 03, 2014 4:24 pm
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Encoder Cables / Connectors

Post by Centroid_Tech2 »

When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Skunk
Posts: 65
Joined: Fri Mar 03, 2023 6:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0008dc111213-1223222881
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Encoder Cables / Connectors

Post by Skunk »

Thanks
Post Reply