AXIS6 ENCODER DIFF ERROR ON BENCH TEST
Moderator: cnckeith
-
- Posts: 3
- Joined: Wed Mar 08, 2023 12:42 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901239
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
AXIS6 ENCODER DIFF ERROR ON BENCH TEST
New to cnc oak system trying to bench test and keep getting spindle axis6 encoder error.
-
- Posts: 372
- Joined: Fri Jan 10, 2014 11:29 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Howard, PA
Re: AXIS6 ENCODER DIFF ERROR ON BENCH TEST
Did you plug an encoder into axis 6 encoder connector?
Re: AXIS6 ENCODER DIFF ERROR ON BENCH TEST
If you don't have a spindle encoder, you should change Parameter 35 to zero.
-
- Posts: 3
- Joined: Wed Mar 08, 2023 12:42 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: Yes
- CNC Control System Serial Number: A901239
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: AXIS6 ENCODER DIFF ERROR ON BENCH TEST
I don't have an encoder yet. I will set 35 to 0 for now and try. thanks for the response.