Acer e-Mill Anilam to AllIn1DC conversion build

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Skunk
Posts: 65
Joined: Fri Mar 03, 2023 6:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0008dc111213-1223222881
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by Skunk »

I have a Toshiba VFS7-2037P

Wired as suggested in a recent post.
20230404_172741.jpg
OUT1 is Green.
cncsnw
Posts: 3765
Joined: Wed Mar 24, 2010 5:48 pm

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by cncsnw »

If you have FLB connected to INP10, but nothing connected to FLC, then you do not have a complete circuit. That would explain why INP10 is red, and why you get a spindle drive fault message. Install wire #946, from your 0VDC (COM) distribution terminals, to FLC.
Skunk
Posts: 65
Joined: Fri Mar 03, 2023 6:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0008dc111213-1223222881
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by Skunk »

I have FLC connected to TB1/13A
cncsnw
Posts: 3765
Joined: Wed Mar 24, 2010 5:48 pm

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by cncsnw »

On your Alt-i screen, is INP10 red or green?

Can you post a current Report?
Skunk
Posts: 65
Joined: Fri Mar 03, 2023 6:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0008dc111213-1223222881
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by Skunk »

Green...will post a report soon.
Skunk
Posts: 65
Joined: Fri Mar 03, 2023 6:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0008dc111213-1223222881
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by Skunk »

Current report
Attachments
report_0008DC111213-1223222881_2023-04-04_19-28-15.zip
(589.21 KiB) Downloaded 2 times
cncsnw
Posts: 3765
Joined: Wed Mar 24, 2010 5:48 pm

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by cncsnw »

Hmm. INP10 is green, but you are getting "9028 SPINDLE FAULT!"

You probably need some professional help, either on-site or via TeamViewer.
Skunk
Posts: 65
Joined: Fri Mar 03, 2023 6:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0008dc111213-1223222881
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by Skunk »

This error too...Power Fault?
20230404_181956.jpg
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by tblough »

That is not an error. It is showing you the drive bus number. Refer to section 2.4 in the AllIn1DC CNC Control Installation Manual.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Skunk
Posts: 65
Joined: Fri Mar 03, 2023 6:56 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0008dc111213-1223222881
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acer e-Mill Anilam to AllIn1DC conversion build

Post by Skunk »

cncsnw wrote: Tue Apr 04, 2023 8:43 pm Hmm. INP10 is green, but you are getting "9028 SPINDLE FAULT!"

You probably need some professional help, either on-site or via TeamViewer.
How do I get this ball rolling?
Post Reply