Update CNC11 to CNC12

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Geotek
Posts: 3
Joined: Sun Feb 18, 2018 10:15 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: Acorn-611
Allin1DC - 0826130838
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

Update CNC11 to CNC12

Post by Geotek »

Recently a Trak bed mill, that had been converted to Centroid in 2013, was donated to our makerspace. It currently is running CNC11-D Mill v3.12. Can we upgrade it to CNC12? We are currently running CNC12 on our Centroid powered CNC router.
Attachments
report.zip
(102.62 KiB) Downloaded 4 times
System ID.jpg
Centroid_Liviu
Posts: 428
Joined: Mon Jul 18, 2011 9:57 am
Allin1DC CNC Controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: Update CNC11 to CNC12

Post by Centroid_Liviu »

Yes, based on the report it is running the Standard PLC program so no changes would be needed. You can update to CNC12 4.14 with just a free software update. Upgrading to the latest CNC12 4.22 would require a Legacy Software Upgrade ($299). This would get you to the Mill Pro level which would also add many new options not currently unlocked on the current setup. You could also upgrade to the latest version CNC12 4.22 and run the Free version but you would not be able to use the probing cycles you currently have until it was upgraded to Pro.

You can download both versions of on the page below (scroll down until you see the ALLLIN1DC / Oak software section for 4.22), and even further down to Legacy for the 4.14 version)
https://www.centroidcnc.com/centroid_di ... loads.html
When requesting support READ THIS POST first. https://www.viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Post Reply