Bios and default password "137", lube alarm #405 need help

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
n1007
Posts: 2
Joined: Wed Jan 25, 2023 5:34 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Bios and default password "137", lube alarm #405 need help

Post by n1007 »

Hi ! All
I can not get in the bios and configuration password "137" getting incorrect.
Lube alarm #405 is getting the machine to stop.
report.zip
(111.34 KiB) Downloaded 1 time
report.txt
(148.98 KiB) Downloaded 3 times
Thanks
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Bios and default password "137", lube alarm #405 need help

Post by tblough »

Someone has changed your configuration password to 9173. It is parameter 42 in the report you just uploaded.

Lube alarm 405 is lubricant level low. Is the way lube resivoir full?
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: Bios and default password "137", lube alarm #405 need help

Post by cncsnw »

Someone has set your configuration password to "9173".

Once in the Parameters table, you can change Parameter 42 to zero to revert to the default password.

"405 Lubricant level low" means that the oil level in your auto lube tank is low, so the float switch has opened; or that one of the wires between the PLC input header H13 and the lube unit is loose or broken. Those wires are usually BRN on INCOM, and RED on INP18.
n1007
Posts: 2
Joined: Wed Jan 25, 2023 5:34 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Bios and default password "137", lube alarm #405 need help

Post by n1007 »

Thanks, I will check them later
Post Reply