Transfer of license
Moderator: cnckeith
-
- Posts: 3
- Joined: Sun Feb 18, 2018 10:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn-611
Allin1DC - 0826130838 - DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: No
Transfer of license
Our makerspace is having a Trak DPM CNC mill that was converted to an Allinone controller donated to us. What is the procedure for transfering the software license from the original owner to us? As far as I can tell, the system was installed in 2013. We have the control head, the rest of the machine will be transported by next week.
Re: Transfer of license
This is a case where "possession is 9/10 of the law".
Just e-mail Centroid Tech Support and tell them the control serial number (or the "system ID" code from the F1/Setup screen); tell them who you are; and tell them you are the new owner.
The unlock codes should already be in place on the control, but if for some reason they are not, Centroid will typically issue them to you as long as the control was paid for when initially sold.
Just e-mail Centroid Tech Support and tell them the control serial number (or the "system ID" code from the F1/Setup screen); tell them who you are; and tell them you are the new owner.
The unlock codes should already be in place on the control, but if for some reason they are not, Centroid will typically issue them to you as long as the control was paid for when initially sold.