Transfer of license

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Geotek
Posts: 3
Joined: Sun Feb 18, 2018 10:15 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: Acorn-611
Allin1DC - 0826130838
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

Transfer of license

Post by Geotek »

Our makerspace is having a Trak DPM CNC mill that was converted to an Allinone controller donated to us. What is the procedure for transfering the software license from the original owner to us? As far as I can tell, the system was installed in 2013. We have the control head, the rest of the machine will be transported by next week.
cncsnw
Posts: 3765
Joined: Wed Mar 24, 2010 5:48 pm

Re: Transfer of license

Post by cncsnw »

This is a case where "possession is 9/10 of the law".

Just e-mail Centroid Tech Support and tell them the control serial number (or the "system ID" code from the F1/Setup screen); tell them who you are; and tell them you are the new owner.

The unlock codes should already be in place on the control, but if for some reason they are not, Centroid will typically issue them to you as long as the control was paid for when initially sold.
Post Reply