CNC 10 v1.51 manual

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
drhodes4601
Posts: 26
Joined: Sun Jan 29, 2023 12:13 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 20551
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: Yes

CNC 10 v1.51 manual

Post by drhodes4601 »

I just bought a Bridgeport Series 1 mill with a Centroid M400s retrofit. It is running CNC 10 v1.51. I found a manual for v2.70 but not v1.51. Anyone have a source for v1.51 manual?
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: CNC 10 v1.51 manual

Post by cncsnw »

This will be pretty close:
http://www.cncsnw.com/232MillManual.pdf

I don't think there ever was a manual specifically for any of the Linux CNC10 v1.xx versions.
drhodes4601
Posts: 26
Joined: Sun Jan 29, 2023 12:13 am
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 20551
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: Yes

Re: CNC 10 v1.51 manual

Post by drhodes4601 »

Thanks!
Post Reply