ALLINONE Communication

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

centroid467
Posts: 230
Joined: Thu Apr 14, 2022 2:46 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No

Re: ALLINONE Communication

Post by centroid467 »

Have you checked your jog panel settings in Setup (F1) > Config (F3) > Contrl (F1)?
bgpv2xt
Posts: 71
Joined: Mon Mar 16, 2020 8:28 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0113202340
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: ALLINONE Communication

Post by bgpv2xt »

Had to change it and yes that was a problem.
Thanks
bgpv2xt
Posts: 71
Joined: Mon Mar 16, 2020 8:28 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 0113202340
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: ALLINONE Communication

Post by bgpv2xt »

So I had to go into 137 and reset HOME and that appears to be a problem solved. For some reason the Z axis had a 37 and change dimension displayed, don't know what causes that.
So thanks everybody I hope that I never have to go thru that again!!!!!!!
Pat
Post Reply