Hello,
I am a machine builder from Ireland. I have used multiple Oak and Allin1DC boards in the past.
One of the machines I did 18 months ago, had it's computer die and the hard-drive was lost. I had the backup file saved to my office computer but when I went to restore the Backup File I found that the backup file was not changing any of the default settings.
Has anyone had a similar problem, I would appreciate some information or advice, should I just re-program the machine or is there a way of using the Backup file to restore my machines settings?
The board I used was an Oak.
I have attached the Backup File that I originally saved.
Best Regards
Andy
File Restore not working (oak)
Moderator: cnckeith
-
- Posts: 1
- Joined: Wed Nov 30, 2022 3:55 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
File Restore not working (oak)
- Attachments
-
- Backup (3).rar
- (130.48 KiB) Downloaded 3 times
Re: File Restore not working (oak)
Can you repackage that as a ZIP file, so we don't have to hunt around for software to view the contents?