File Restore not working (oak)

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
andyleahy
Posts: 1
Joined: Wed Nov 30, 2022 3:55 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

File Restore not working (oak)

Post by andyleahy »

Hello,

I am a machine builder from Ireland. I have used multiple Oak and Allin1DC boards in the past.

One of the machines I did 18 months ago, had it's computer die and the hard-drive was lost. I had the backup file saved to my office computer but when I went to restore the Backup File I found that the backup file was not changing any of the default settings.

Has anyone had a similar problem, I would appreciate some information or advice, should I just re-program the machine or is there a way of using the Backup file to restore my machines settings?

The board I used was an Oak.

I have attached the Backup File that I originally saved.



Best Regards
Andy
Attachments
Backup (3).rar
(130.48 KiB) Downloaded 3 times
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: File Restore not working (oak)

Post by cncsnw »

Can you repackage that as a ZIP file, so we don't have to hunt around for software to view the contents?
Post Reply