One of the Centroid controls I have is an Allin1DC with Windows 7 installed. Normally if working ok I would leave it alone, but I would prefer to change now rather than later since it is no longer supported. Is this a straight forward change or will I have other issues I'm not aware of? Presently I have the newest version Centroid software installed.
John
Changing from Windows 7 to Window 10
Moderator: cnckeith
Re: Changing from Windows 7 to Window 10
I have updated several without any memorable issues.
-
cnckeith
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Changing from Windows 7 to Window 10
might as well go straight to 11
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html