I am trying to get the VCP to work on my All in one. The PLC does not have the VCP code in it, unless i missed it. What is the process to get the proper src to use the VCP.
Please see attached report.
Thank You
Jim
VCP Button press not working. My need PLC.src
Moderator: cnckeith
-
- Posts: 36
- Joined: Tue Feb 19, 2013 4:08 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A2001675520
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
VCP Button press not working. My need PLC.src
- Attachments
-
- report_0222171695_2022-10-03_14-03-39.zip
- (4.97 MiB) Downloaded 2 times
Re: VCP Button press not working. My need PLC.src
Reinstall v4.14 -- or just use the "plcinstaller.exe" utility from that update -- and choose to install a PLC program like "Centroid-Standard-Mill-ALLIN1DC-r7.src".
Alternately, install the attached PLC update using F7/Utility -> F2/Restore Report.
Alternately, install the attached PLC update using F7/Utility -> F2/Restore Report.
- Attachments
-
- report_PLCUpdate_allin1dc-basic-mbl-cwp4.zip
- (121.17 KiB) Downloaded 2 times
-
- Posts: 36
- Joined: Tue Feb 19, 2013 4:08 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A2001675520
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: VCP Button press not working. My need PLC.src
Thank You I will try this in the morning