Programing radius on my mill

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

Post Reply
Baeret
Posts: 1
Joined: Tue Sep 27, 2022 2:14 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Programing radius on my mill

Post by Baeret »

I got my mill up and runs great trying to program a end mill to do a radius need help.
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Programing radius on my mill

Post by tblough »

Section 10.7.3 in the mill manual describes the four methods of cutting an arc in Intercon: End Point & Radius, Center Point & Angle, Center Point & End Point, and Mid Point & End Point. Start Point is always the end point of the previous move.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply