Slavtec touch probe

All things related to Centroid Oak, Allin1DC, MPU11 and Legacy products

Moderator: cnckeith

cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Slavtec touch probe

Post by cnckeith »

that big in your face probe tripped graphic is in Acorn v4.6x+ and has not been ported over to Allin1DC software yet. we are working on that now... porting features from Acorn to Allin1DC and vise verse.

use the <alt i> plc diagnostic screen to see the probe trigger and probe plugged in inputs with Oak and Allin1DC software. you can also create a VCP led button to show the state of those inputs as well if you want something on the screen all the time.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
S-K Machine
Posts: 73
Joined: Mon Jul 05, 2021 5:20 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: A901038
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Lindenhurst, New York

Re: Slavtec touch probe

Post by S-K Machine »

Thank you Keith.
There had to be a logical explanation out there in Centroid land somewhere.
Post Reply